The Hikvision DS-7616NI-I2-16P NVR supports 16 channel 16 IP cameras at up to 12MP in resolution. Connection to the internet is a breeze with the Hik-Connect ( AKA P2P & EZVIZ) Setup with minimal technical or port forwarding knowledge or expertise required. FREE iPhone, iPad, Android, PC & MAC remote viewing software (iVMS 4200 & iVMS 4500). T
- 16 IP cameras inputs
- 200MB recording rate
- Up to 12 MPixel recording
- H264 & H264+ COMPRESSION
- HDMI to 4K and VGA output
- HDD quota and group management
- 8independent PoE @ 200 watts
- 2 SATA HDD – up to 8TB each
- Hik-Connect ( EZVIZ P2P cloud)
- IR Remote control unit is an optional extra
This 16 channel NVR allows you to connect and record up to 16 IP cameras using CAT5 cable RJ45 connections. DS-7616NI-I2-16P NVR can record up to 12MP cameras in resolution delivering beyond 4K Ultra high definition picture quality which is substantially larger than standard 1080P ( 2MP ) network security systems
Use your smartphone/tablet with the DS-7616NI-I2-16P NVR to remotely access your cameras wherever you are by using the web browser to connect to your NVR. This can also be done on your PC and Mac by downloading the live view interface, making watching your cameras a simple task. We supply the DS-7616NI-I2-16P NVR ready to view on the internet as soon as you plug it into your broadband router.
This NVR with preconfigured settings is ideal for most setups straight out of the box. The VGA and HDMI outputs allow you to connect the NVR to a range of TVs, screens and CCTV monitors. Install up to two 12TB hard drive to give you approximately 28 days storage using the highest quality setting with 16 2MP cameras. To save space on the hard drive, enable the motion detection settings on the NVR to use your space more effectively.
The recording time can be extended by simply changing the settings and reducing the picture quality. You can also extend the recording time by purchasing a larger disk drive.
For a full new install, you will also need-
- A hard drive for storing video footage
- Cat5e cable – one per camera
- A screen or your own TV to view it on
- A HDMI cable to connect your screen
Hikvision Support Page
Hikvision Support UK – CCTV Wholesales
We provide lifetime support for all Hikvision products purchased from us. Please note that we are not HIKVISION , we are Hikvision authorised wholesaler and if your goods were not purchased from us, we will charge for this service. Hikvision do not provide support to end users i.e. general public that are not a security installation company or if goods were not purchased through authorised sellers. Your first contact should always be the place of purchase or your installer.
We will need your post code, product code and serial number in most cases. Model and serial numbers can be fond on a printed label on the product. All Hikvision products purchased after December 31st 2017 are guaranteed for 3 years from date of invoice.
In the event that you may suspect a product is faulty, please contact us by telephone when you are with the product so that we can go through some check with you. Please bench test all products and ensure you obtain a return number from us as goods without this will be return to sender.
Affordable quality and competitively priced makes Hikvision IP the only choice for all new installs. Plug and play and is sold rebranded or rebadged versions such as HiKcom, Alien Mega Hero, DSD, Odyssey, LTS , KT&C to name a few. The systems are also available in TVI ( HD over coaxial or cat5e using video bulans) or as IP which is also HD over CAT5e with the added advantage of being able to carry power as well as data on one cable. Nearly all units sold by us have the power supply built into the recorder called PoE.
With just one CAT5e cable to run between NVR and cameras makes Hikvision IP systems fast and neat to install. No need for the separate power supply or bulky coaxial cables.
For upgrades to High Definition ( HD), existing cables are likely to be coaxial cable ( like TV aerial cable ). In this situation where re-cabling to CAT5e would be costly, you can use a hybrid recorder. This will allow you to use HD TVI cameras on the coaxial cable and new ones can be wired in CAT5e.
The Hikvision IP cameras have an IP sniffer & configuration software called Hikvision SADP tools. This software is also needed to request a password reset as well as the main tool for diagnosing problems. Make sure you install this on your windows laptop! Its not availiable for MAC.
A familiar user interface to access the cameras GUI using Microsoft Internet Explorer if needed.