/ / / / 8MP CCTV Video Balun with Surge Protection, pk2

8MP CCTV Video Balun with Surge Protection, pk2

£5.00

In stock

SKU: TP-952 Category:

Description

Pack of 2 8mp video balun.

High-grade 8MP  CCTV video balun with surge protection. Sold in packs of two

These video baluns are colour coded with blue for use at DVR side and red at the camera end. Sold in pairs. Used for sending AHD CCTV camera video signal over CAT5 twisted pair cable instead of RG59 coaxial cable. Support camera’s resolutions up to 8MP. Screw terminals for a secure connection. Built-in lightning protection grade 3. No power required.

Approx operating range –

  • 130M @8MP
  • 250M @2MP

for use with TVI-HD, Turbo HD, QTVI, CVI, AHD & QAHD systems.

CCTV video baluns, also known as UTP baluns, allow traditional coax cable to be replaced by category 5 and other forms of twisted pair wire in CCTV video camera & surveillance installations. Video baluns allow installers to use more cost-effective structured cabling techniques to wire security cameras. By using video baluns, UTP wire such as cat-5 can be run over long distances easier than coax cable and for less money. Active balun transceivers enable UTP wires for cameras to be run distances up to 5,000 feet. If you are new to the idea of using baluns for video, check out our video balun installation videos.

Please be aware while video signal can be carried over a longer distance, power is limited to 50 meters for cameras amperage up to 250mA and 30 meters at 600 mA.

Do not pair up the cable carrying the video signal but the other pairs will need to be paired for power.